At 2019 we spent testing and researching the most effective after-market rear-view cameras with monitors for your vehicle. we tend to suggest the reverse-camera WiFi back-up camera because the best overall as a result of it’s simple to put in, activates mechanically after you shift into reverse and uses a digital wireless signal to forestall interference. It’s affordable, however you’ll save a couple of a lot of greenbacks if you go together with our greatest price decide, that additionally performs well. each of these choices need splice into the wires in your tail lamps to power the camera – that isn’t as tough because it might sound – however if you would like to avoid that altogether, we tend to suggest the WiFi backup camera for its super simple installation.
What is? WiFi Backup Camera System
WiFi Backup Camera System where camera connects to smartphone – iPhone, iPad and Android devices.
1, no need for mobile Internet traffic, a new transmission method, to achieve a truly intelligent reversing.
2, Apple, Android with WIFI equipment, can achieve wireless reversing rear view, video.
3, do not hang reverse gear, the vehicle is moving forward, the point software can also monitor the latter situation.
4, to achieve wireless reversing, eliminating complex installation procedures and saving installation costs.
5, using WIFI wireless transmission, pure digital signal without interference, the receiving end does not need any external equipment.
Wifi backup camera system installation video
WiFi Backup Camera System Wiring
Two wiring methods:(This camera can also be installed in front of the car.)
The first type of wiring: the camera directly through the switch A, plug in the cigarette lighter power supply. This connection benefits, without breaking the original car line, wiring is simple, you can receive control camera on and off.
The second type of wiring: the red line of the camera extension cable is connected to the ACC positive (such as the fuse box +), the black wire is connected to the negative pole or grounded.
● QR code scanning and downloading;
open the scanning window and scan the product packaging QR code.
● Website download;
Apple device enters APP Srore interface search;
Android device enters Google Store search;
F-Car download Product installation (very important, please read it carefully)
1. Turn off the power supply of the vehicle first, and do not power on when the power cable of the camera is not connected.
2. Determine the installation position of the car camera.
The first installation method, select the location where the camera is installed, and find the two power cord wiring positions to install.
ACC power supply positive (red power cord), please pick up the ACC wiring position (such as the fuse box positive).
Ground the negative pole (black power cord), please pick up the negative wiring harness.
The second installation method, ACC and GND two wires are connected to the cigarette lighter, red is connected to the red wire, black wire is connected to the black wire, wrapped with tape, press the switch to use.
Install the camera, remove the license plate light, and connect the camera through the slot of the license plate light to the host. Connect the exact position of the power cord, start the vehicle, adjust the optimal reversing angle of view, fix the camera with screws, and finally fix the power cord with a cable tie. Second, accept the equipment precautions
1, must be Android 5.0 or above system can be used
2. The first time the device is used, the password connection must be entered correctly. three. General troubleshooting
Firstly, whether to fix the antenna fixing position and metal contact again, re-select the fixed position of the antenna and debug again.
How to turn on backup camera while driving honda (toyota/ford/silverado/chevy/forward/pioneer/gmc),No matter what car, but how to use reverse camera while driving The starting principle is the same,rear view driving camera are divided into wired cameras and wireless mirror camera. Our product have best than ebay or any other platforms. the installation is simple, you can set in trucks, SUV, RV, or any car you want. Here is our product introduction and backup camera installation guide.
how to use rear view camera while driving
The rear view camera (backup camera) will activate with the ignition switch ON,engine ON and the shift lever in the R(reverse) position.
This system is a supplemental system that shows behind the vehicle through the audio screen while backing up unless equipped with a navigation system ,then will display on the navgation screen.
Also,it displays rear view image when there is driver’s request even in N/D gear.It provides image optimized for driving mode unlike parking mode image.All three conditions must be met to operate driving assist mode.
– IGN Status:ON
– Engine Status:ON
– Gearshift Status:D or N
– Rear view camera switch:ON
The system is a supplementary funciton only.It is the reasponsibility of the driver to always check the inside/outside rear veiw mirrons and the area behind the vehicle before and while backing up because there is a dead zone that can’t be seen by the camera.
Always keep the camera lens clean.If lens is covered with foreign matter, the camera may not operate normally.
Warning-Backing & uning camera
Never rely solely on the rear view camera when backing.You must always use methods of viewing the area behind you including looking over both shoulders as well as continuously checking all three rear view mirrors.Due to the difficulty of ensuring that the area behind you remains clear,always back slowly and stop immediately if you even suspect that a person,and especially a chinld,might be behind you.
how to use rear view camera while driving Video demo
Our product have best price and quality than ebay or any other platforms.
If you are driving a large truck or bus, reversing or stopping, you may find it difficult to see everything behind your car or vehicle. In this case, when you reverse or stop, you may damage your car or someone else’s car, maybe even hurt in the accident, may hurt your car or some of the people behind the car, which is very common in the driveway and parking space, Our suggestion is that you install a wireless backup camera, so that U can avoid unnecessary trouble of reversing.
Wireless RCA video transmitter & receiver kit for car rear view camera
Wireless RCA video receiver/transmitter; avoid complicated wiring, to be used with in-car monitor, head unit, DVD player and camera, etc
Receiver/transmitter frequency: 2370MHz
Av in/out: PAL/NTSC Composite video signal, RCA Jack
Receiver/transmitter distance: 50m (in jam-free open areas)
Installing guide for wireless backup camera
Most cameras are equipped with a user’s installation guide. It is recommended that you check the guide before installing the camera. Wireless reverse cameras can be used in various sizes and shapes to meet your personal preferences and preferences. This is the mode you choose to like, but your choice should provide clear coverage and car in the rear.
1.You first dismantle the lamp housing above the license plate.Be careful not to damage the connection cable, Backup camera is fixed on License plate lamp, the license plate lamp system of the rear lighting system is the most convenient location after entering the room through the connecting cable.
2.Then, the cable of the license plate is removed, and the power and video cable of the transmitter system are connected to the corresponding cable of the wireless camera. Be careful not to exchange positive and negative wires because it can cause serious injury.Attention should be paid to using excessive wiring and using Scotland lock to avoid manual splicing of wires. Then put the rear lamp in the right place.
3.In order to transmit signals effectively, the transmitter should be strategically placed to avoid obstruction of signal transmission. You should ensure that your connection is perfect to avoid any potential short circuits that may damage the entire system.
4.Entering the monitor, once your monitor is connected to the power supply, power is sent from places such as the lighter and the attachment socket, and the receiver is connected by the USB port of the fast sliding T connector.Use the power tester to locate any leakage, which helps prevent battery drain once you do not use the rear wireless camera.
5.After completing the installation, all functions of the camera should be tested, including the test of the camera’s viewing area and the effectiveness of the camera position. This should be completed in the appendix power mode.
The rear wireless kit comes with supporting tools they embrace the wireless camera. A transmitter system that picks signals from the camera, a receiver system that’s placed next to the monitor, vehicle power adapters that ar vital in powering the entire system, adapter cables and a monitor that’s accustomed show pictures from the rear of your automotive.
Some important security tips for adding a Wireless backup camera
Security is good when you are connecting and installing. Most security hints are usually provided in the installation manual.
When you disconnect the cable from the battery, it is important that you leave the battery post. The essence is to make sure that the cable does not touch the battery terminal, and you do not expect it, which may be hazardous to your health.
One of the basic tips you must observe is that the battery cable must be disconnected from the battery. The size of the cable is also important. You can check the manual to determine the optimal spanner size for connection and installation.
Backup camera is a good safety option for reversing, because you can easily see the area behind your car. If you have children / obstacles / others behind your car, you can see everything with the help of the backing camera. Learning how to install an inverted camera is important for the user, because he can understand the working principle of the rear view camera, and is more conducive to the inspection of the failure of the camera.
Rear view camerais divided into wired and wireless, and divided into rear view camera special and reversing camera universal car, but the rear view camera wiring method of reversing camera installation is consistent.
Every trendy automobile owner must study backup camera installation guide to find out the way to move it. There ar totally different styles of rear-view cameras on the market. At first, you have got to search out out the simplest backup camera. Most of those rear-view cameras aren’t troublesome to put in.
Backup / Rear view camera installation guide images
You can do the installation by yourself once reading the installation guides or look video tutorials regarding a way to have them put in. once reading the tutorials, you’ll be able to perceive the assorted elements it needed and skills these elements work.
Backup / Rear view camera [ installation Wiring Loom ]
Feamal RCA (Yellow) + RCA Extension Cable ( Red:[12V +(Red) To backup lamp power and To reverse monitor/GPS Cable]) + Video Adaptor Cable
Female Poer Connector (Red) + Male Power Connector (Black) GROUND (Black) To backup lamp (-ve)
Backup camera trigger wires installation guide
For the installation, you need the following items and they include:
The power harness
These area unit the foremost vital things you need, there can be a couple of others.
Backup Camera RCA Cable
This is another item required for the backup camera installation. This is discussed in the camera section and it usually includes the yellow RCA video cable. this can be used for video association.it’s function is to trigger the monitor from the camera.
The cable long can vary and it will vary from 45cm to 65cm long. There ar instances wherever the cable may be blank oxide. it’s a raw lead, and it may be used for various things.
Moreover, it’s necessary to state that in the installation method that these cables ar used otherwise. as an instance, the yellow inputs ar meant only for the video signal whereas the red and therefore the black input is intended for power then on.
Rear View Camera The Power Harness
The power harness is another instrument you need for the affiliation and therefore the installation. This includes DC power connexion. It includes of twelve volts power lead, additionally as black ground lead. this can be chiefly a male DC power connexion. It additionally includes feminine twelve volts power pin then on.
The camera is that the most vital item you would like throughout the installation. The camera is comparable to the monitor. this is often as a result of they need similar options cherish single cable and DC power plug as well as yellow RCA wire. you would the backup camera to watch the Rear obstacle as you Reversing.
Rear view camera, additionally called a backup camera, helps you to see what’s behind your vehicle while not having to appear backwards. although the device comes commonplace with several new automobile models, you’ll be able to add a rear view camera to your vehicle if it didn’t accompany one.
Backup camera installation guide:
Furthermore, it’s vital to inform the users that the monitor might not have trigger wire, this doesn’t recommend that it will solely be used manually. this is often not the case. Most monitors aren’t fitted with trigger wire which is as a result of they possess what’s called video sense feature. The video feed will continuously build them run mechanically.
If you want to continue installation, here are some steps and procedures. You must comply with this.
Rear view camera/Backup Camera Installation processes:
1. Cutting holes on the safety box
The first phase of the installation process is that you have to attract the power to the monitor. You only need to connect the red line to the volt power, and then connect the black line to the ground. To send the power to the monitor, you must go to the fuse box. The way the monitor works is determined by the trigger line used for connection.
The best way of installation is to connect it to the positive side of the vehicle reversing lamp. When this is opened, the monitor will automatically open whenever the gear is placed opposite.
If you want to install it for manual operation, you do not have to connect to this operation. You can connect on the source, which means that whenever you open the key, the monitor opens.
As long as you turn off the engine, it will flameout. This mechanism is the best for those who use commercial vehicles.
2. Installing the backup camera:
You just saw the first step of the connection. The second step is not the same as the first. For this connection, you simply connect the A4 harness to the output of the camera, which is usually regarded as the A4 wiring harness of the female output.
3. Connecting power to both the monitor and the rear view camera:
In this step, you must send the power to the camera by simply connecting the red line to a 12 volt power supply. Alternatively, you can connect to the positive side of the reverse side of the vehicle and connect the black to the ground.
4. Monitor installation
When you are convinced that the monitor has taken the power out of the fuse box, the camera will also draw power from the reverse taillight. It is time for the system to work.
Connect to the camera, then use the standard yellow cable (also known as the A5 cable) to continue the connection. When connecting, please refer to the information provided above, because it will guide you to complete the connection process.
When you know that the connection has been passed, the next step is to clean up the connection. Whenever it opens the key, or when it reversing, it will start working.
Rear view camera installation Guide 4 steps
1. Connect the positive and negative power provide wire of backup camera installation with the positive and negative leads of Backup lightweight (Backup Light).
When the backup lightweight activates, the backup camera activates furthermore.
Note: don’t connect the ability provide wire of backup camera with visual signal or Tail lightweight.
2. Connect the backup camera video cable with the backup camera / rear view camera install RCA video input cable from radio harness.
Note: don’t connect the backup camera video cable with Video-in RCA input cable from radio.
3. Connect the Backup ( Back ) Camera police investigation lead ( Blue color or Orange/White modify totally different model ) from radio harness with the positive terminal of Backup lightweight.
When the radio detects the backup lightweight is on by voltage, the radio switches into backup camera input mode mechanically.
Some of the backup cameras’ video cable hooked up ( confer with underneath image ) with a trigger wire to increasethe backup camera police investigation result in the positive terminal of backup lightweight.
4.If there’s not a trigger wire from the video cable, you would like to own a extension wire to attach the backup Camera police investigation lead and positive terminal of Backup lightweight.
Note: This wire affiliation is that the most vital step for the installation Guide.
If the radio cannot switch into backup camera input mode mechanically once the backup lightweight is on, please check the barge between the police investigation lead and trigger wire or the matter that the trigger wire broken some elements.
Video based connection system
The backup camera installation guidelines discussed above do not apply to video based systems. It is a system based on the trigger line. The connection discussed earlier is almost the same.
When you want to make video based connections, the first thing to do is to master all the components. This will help the installation process.
For video based connections, you need the following items. They include the following:
Camera power wire harness
Monitor power wire harness
These are the basic components or items that you need for this connection. These projects should perform important functions, which are as follows: Audio and video lines
Another aspect of the installation process is the RCA cable. This is an important aspect, which includes the RCA video cable connected to the camera. It has an important purpose. It can supply monitors from cameras.
Camera power wire harness
This includes a DC power connector, which is the power cord. The DC power connector is connected to the 12 volt power lead, just like black is used for grounding leads. It also uses a 12 pin power plug.
Monitors are essential for this installation. The monitor of this connection has tails. This, in turn, has video input. The input is RCA cable, it has different coat, red, white, yellow cable.
White and yellow jackets are designed for video input. If you get used to the wiring in the TV, you will not find it difficult to install because it requires the same wiring process.
The camera is the most important part of the system. This is not the same as the case found in the connection of the trigger. They are different in some ways. It has two parts of the wiring harness. This type of camera does not require large holes and can be connected in a waterproof manner.
Monitor power wire harness
This is another important aspect of the installation process. The monitor is characterized by a power cord, which is always connected to a red or black DC power connector. The other side of it is two wires.
They include red lines and black lines. Black wires, as usual, will be on the ground, while the red line will become positive power supply.
Backup camera install Final report:
This is what you need to install a backup camera. The installation process is not difficult, as you described from above. Usually, manufacturers include guidance, which can help you in connection and installation process.
This means that you should read the instructions and follow it. In addition, video tutorials are available. You can watch video tutorials and follow instructions. You can do it yourself. If you think it is not easy to do this, you can hire an expert to do it for you.
The video based backup camera installation, this is the stages it will take:
1, Connect car charger with rear view morrot and plug into cigarette lighter.(The installation process must be started by connecting the DC power harness to the monitor designed for power input. You have to make sure and make the right connection.)
2, Connect transmitter with rear view cmeras. (the connection is to connect the power to the power monitor. You can connect the red line to the 12 volt power supply and then bring the black to the ground. Usually, the power supply to the monitor is taken out of the fuse box.)
3, Find out the +12V backtup camera reverse light cable in R-gerar with test pencil.(Now is the time to connect the video taillight and camera power to the camera connector. As mentioned, pigtail is important because it enables the power available to the camera and connects the video output to the monitor.)
Effect (connect the power to the camera, you can connect it to the red line and the 12 volt power simply. Black cables should enter the ground as usual. The energy that comes into the camera is usually from the reverse taillight.)
Free online rear view camera installation guide
Most cameras are equipped with user backup installation instructions. It is suggested that you check the guide before installing the camera. Reverse cameras can be used in all sizes and shapes to meet your personal preferences and preferences. This is the style you like, but your choice should provide a clear rear light outline or picture.Having a thought of that’s about to assist you within the installation method is equally necessary. Even first-time users will simply get them put in when reading the guides. Most makers create these guides out there. you merely have to be compelled to perceive them and recognize the assorted parts.
If you’ve recently purchased a system from Reverse-cameras.com, please browse through these simple directions to be told the way to install a rear read safety camera install Guide. Installation will sometimes be done by the client, and that we supply a fee schoolsupport line must you would like more help.
Rear view camera doesn’t work
1. If the Backup camera is newly installed, check whether the connection is correct or not. Do you install the illustration above?
2. Rear view camera can not work suddenly, it is also check whether the line is loose or check whether the backup camera has been damaged.
3.The last thing you can’t do, check the car directly to 4S and let the staff check it for you.
A:How to install backup camera? Q:How to install backup camera step by step guide.
European Car License Plate Rear View/Backup Camera | RCS
Some customers are confuse how to estimate whether this car dvd player fits for their car?
You may find some answers from the under instructions:
1. What is double din for head unit?
The most standard sizes for car audio head units and enclosures is ISO 7736:
–Single (180×50 mm) in Europe, South America and Australasia
–and Double (180×100 mm) in Japan, the UK and North America. Double DIN is also written as 2 DIN and double din.
ISO 10487 is the standard for connectors for the head unit to the car’s electrical system.
For more information please log in: https://en.wikipedia.org/wiki/Head_unit
Double Din is a standard size for head unit- 180*100mm ( probably 7.09*4 inch).
We suggest you to measure the length and height of radio size befor you purchase, and compare your measure size with the installation size from our product listing’s production information.
However, a remarkable fact that some radio panels are similar to double din size. Actually, they are not, they have a longer length or height than standard size. These special size will alway be designed in some car makes, such as Toyota, Dodge, etc. Please make sure don’t confuse with double din size.
2. What can I do, if my car radio is not a double din size?
Some of car radio are not a standard double din, even not a rectangle(such like the under picture).So how can we do?
1. Find and purchase a car dvd player special designed for your car radio model.
The special designed car dvd player would be pre-install a dashboard similarity with your orginal radio panel. It’s plug and play for your car.
Here is a dvd player model for Toyota higholander from above picture:
2. Purchase a dash kit from aftermarket, to modify the radio size into standard double din.
Find and purchase your car model’s dash kit from Amazon or ebay. The size allows to install a double din dvd player, after install the dash kit for your car.
1. The mirror link feature is only available in the Android stereo we sold.
2. The latest smartphone may not be supported to mirror link with the Easy connected app. The app will keep updating to be compatible with more smartphone models.
You can download the latest version of Easy connected app from Download or contact our technical support to get the latest version.
Android Devices Mirroring
1.Enable “USB debugging” setting in your phone.
How to ebable the “USB debugging” setting from you phone?
Take Samsung smartphone as an example:
1. Get into “apps”-“setting”-“About phone”.
2. Find the “internal version” from “about phone”, and press “internal version” constantly by 7 times.
3. Mobile prompts you are already in developer mode.
4. Back to “setting”, and would find a new option “Developer options”.
5. Click into “Developer options” and enable “USB debugging”
It’s different way to enable “USB debugging” setting in different smart phone. If you don’t know how to operate, please search the method from Google.com.
2.Hoop up the phone and radio with USB cable.
3.Open the app “easy connected” app, and do as the instruction from app to connect the devices.
Note： the mirror link for android devices is only for image display, please connect the head unit with your phone Bluetooth at the same time for audio playing.
iOS Devices Mirroring
1. Enable the wifi hotspot from iphone, and hoop up the head unit to the wifi hotspot.
2.Open the app “easy connected” app, and do as the instruction from app to connect the devices.
General reversing camera how Reversing Cameras Work.
1.please don’t mistake the postitive and the neg-ative pole,otherwise the camera will burn out.
2.Please make sure the red cable connects to the positive reverse light electrode.
3.The black cable connects to the negative reverse light electrode.
A:Monitor (not included in the package)
B:Camera power source
As illustrated above，If any doubt, welcome mail consultation（email@example.com）